Showing 33–48 of 188 results
Blue Demon ER5356 1/16″ Aluminum TIG Rod, 10# – ER5356-063-10T Description Blue Demon ER5356 is a general-purpose aluminum alloy which is usually chosen for its relatively high shear strength. It offers excellent corrosion resistance when exposed to salt water ER5356 should be considered for welding 5000 series aluminum base metals AWS A5.10, Welding current DCEP…
Blue Demon ER70S-3 Carbon Steel TIG Rod, 10# Description Blue Demon ER70S3 is a general purpose TIG wire suitable for many carbon steel welding applications. It is a silicon and manganese deoxidized wire making it excellent for general fabrication. This product requires a shielding gas. Typical Applications: General fabrication Metal furniture Sheet metal Ornamental iron fabrication…
Blue Demon ER70S-6 1/16″ Mild Steel TIG Rod, 10# – ER70S6-063-10T Description Blue Demon ER70S-6 is a mild steel wire that contains higher levels of manganese and silicon than other MIG wires to produce high-quality welds when used on dirty, oily, or rusty steel. General shop applications with poor fit-up Steel castings or forging salvage…
Blue Demon EWG 1/16″ Rare Earth Tungsten, 3/pk – TEMM-116-3T Description Blue Demon EWG has been proven to dramatically increase weld quality and service life by offering unsurpassed stability and consistency in every weld. Is non-thoriated, non-radioactive, and non-cacinogenic. Is a proprietary product containing multiple additives of rare earth oxides Used at all current ranges on…
Blue Demon EWG Rare Earth Tungsten, 10/pk – TEMM Description Blue Demon EWG has been proven to dramatically increase weld quality and service life by offering unsurpassed stability and consistency in every weld. Is non-thoriated, non-radioactive, and non-cacinogenic Is a proprietary product containing multiple additives of rare earth oxides Used at all current ranges on both…
Blue Demon EWLa-1 1/16″ 1.5% Lanthanated Tungsten, 3/pk – TE15L-116-3T Description This designation is a tungsten electrode containing 1.3-1.5% of dispersed lanthanum oxide for enhanced arc starting and stability, reduced tip erosion rate, and extended operating current range. Can be used as nonradioactive substitutes for 2% thoriated tungsten as the operating characteristics are very similar….
Blue Demon EWP 1/16″ Pure Tungsten, 3/pk – TEP-116-3T Description EWP (Pure) are unalloyed tungsten electrodes and are non-radioactive. EWP electrodes are generally used on less critical applications, except for welding Al and Mg. Current carrying capacity is lower than those of other tungsten electrodes. Provide good stability when used with AC, either balanced wave…
Blue Demon EWTh-2 1/16″ 2% Thoriated Tungsten, 3/pk – TE2T-116-3T Description The higher thoria content in the EWTh-2 electrode causes the operating characteristic improvements to be more pronounced than in the lower content. Additional thoria provides about 20 percent higher current carrying capacity When AC welding balling can be accomplished by welding with DC electrode…
Blue Demon Pure Tungsten, 10/pk – EWP Description EWP (Pure) are unalloyed tungsten electrodes and are non-radioactive. EWP electrodes are generally used on less critical applications, except for welding Al and Mg. Current carrying capacity is lower than those of other tungsten electrodes. Provide good stability when used with AC, either balanced wave or continuously…
CK Worldwide 2 Series 1/16″ Gas Saver Kit – D2GS116-P Description CK Worldwide Gas Saver Kit for 1/16″ for 2 Series torches. Clear Pyrex nozzle improves visibility and reduces gas consumption by up to 40%. Saves up to 40% of shield gas consumption Improved gas coverage versus standard collet bodies Tungsten stick-out can be up…
CK Worldwide 3 Series Gas Saver Kit, 1/16″ – D3GS116-P Description This CK Worldwide 3-Series Gas Saver kit can save up to 40% of shield gas consumption. It provides better gas coverage than the standard collet bodies, and the clear nozzle provides improved weld visibility. Replacement parts are available and inexpensive. Save up to 40%…
Crown Alloys 12-AH-10 1/16×36″ TIG Welding Rod 1lb Tube – TT12AH/TL-BP Description Brand: Crown AlloysAlloy: 12-AH-10 Dimensions: 1/16 x 36″Type: TIG Welding RodClass: Air Hardening (D-2 to D-3) Tool Steel TIGPackage: TubeWeight: 1 lb
Crown Alloys 12-FH-10 1/16×36″ TIG Welding Rod 1lb Tube – TT12FH/TL-BP Description Brand: Crown AlloysAlloy: 12-FH-10 Dimensions: 1/16 x 36″Type: TIG Welding RodClass: Chrome-Vanadium (6150) Tool Steel TIGPackage: TubeWeight: 1 lb
Crown Alloys 12-HW-10 1/16×36″ TIG Welding Rod 1lb Tube – TT12HW/TL-BP Description Brand: Crown AlloysAlloy: 12-HW-10 Dimensions: 1/16 x 36″Type: TIG Welding RodClass: Machinable Hot Work Tool Steel TIGPackage: TubeWeight: 1 lb
Crown Alloys 2-25-10 – 1/16×36″ TIG Welding Rod 1lb Tube – TT225/TL-BP Description Brand: Crown AlloysAlloy: 2-25-10Dimensions: 1/16 x 36″Type: TIG Welding RodClass: High Strength Tool Steel TIGPackage: TubeWeight: 1 lb
Crown Alloys 630/17-4PH 1/16×36″ TIG Weld Rod 1lb Tube – ST630/TL-BP Description Brand: Crown AlloysAlloy: 630/17-4PH Dimensions: 1/16 x 36″Type: TIG Welding RodClass: Stainless Steel TIGPackage: TubeWeight: 1 lb
