Showing 881–896 of 1904 results
Miller Pushbutton Fingertip Control (6-Pin Plug) – 195269 Description Miller Pushbutton Fingertip Control with single button. 6-pin plug connection. For use with Maxstar 150 STL/STH and Multimatic 200. Momentary-contact switch for contactor control. Rubber-covered push button dome switch ideal for repetitive on-off applications. Includes: 26.5 ft (8 m) cord and plug.
Miller Pushbutton Fingertip Control, 2 Button, 14-Pin Plug – 300666 Description Miller pushbutton fingertip control with 25 ft cord attaches to the TIG torch to remotely start and stop the TIG welding process. 14-pin connection and 2 button control.
Miller Quantitative Face-Fit Test Kit – 261086 Description Miller’s quantitive Face-Fit Test kit included two adapters that allow the LPR-100 and LPR-100 O/V to be quantitatively fit tested with a TSI Portacount Fit Test Machine. Fit Testing It is required for mandatory tight-fitting face piece respirator use. The primary purpose of the test is to identify…
Miller Quick Select Drive Roll, Solid Wire & Flux-Cored Wire – 261157 Description Miller Quick Select V Groove Drive Roll For .024-inch (0.6 mm) or .030/.035-inch (0.8/0.9 mm) solid wire, and .030/.035-inch (0.8/0.9 mm) flux-cored wire. (Direct replacement for 220179 and 237338) Accessories
Miller Rcc-14 Remote Contactor & Current Control (14-Pin) – 151086 Description Side-to-side (east/west) rotary-motion fingertip control fastens to TIG torch with Velcro straps. Included with Product 26.5 ft control cord. (For all Miller solid-state power sources after serial number JK674521.)
Miller RCC-6M (6-pin Plug) – 301118 Description Side-to-side rotary-motion fingertip control fastens to TIG torch with Velcro straps. Works for Maxstar 161 STL, Maxstar 161 STH, and Multimatic 200.
Miller RCCS-6M (6-Pin Plug) – 195503 Description NNorth/South rotary-motion fingertip control fastens to TIG torch using Velcro straps. Includes: 26.50 ft (8m) control cord and plug. Great for applications that require finer amperage control.
Miller Rccs-6M Control (6-Pin Plug) – 195184 Description North/South rotary-motion fingertip control fastens to TIG torch using Velcro straps. Includes: 13.25 ft (4m) control cord and plug. Great for applications that require finer amperage control.
Miller RCCS-RJ Remote Fingertip Control – 770669 Description Remote contactor and current control for your Hobart EZ-TIG™ 165i TIG welder or Miller Diversion® 165 and 180 TIG welders. The North/South rotary-motion fingertip control fastens to your TIG torch using two Hook and Loop® straps. Included with Product 14ft (4.3m) control cord Hook and Loop ® …
Miller RCCS-RJ, Fingertip Control 14 FT, Diversion 165,180 – 301146 Description RCCS-RJ fingertip control 13.25 ft (4m) cord for Diversion 165 and 180. North/South rotary motion fingertip current/contractor control fastens to TIG torch using two velcro straps. Great for applications that require a finer amperage control. Includes cord and plug.
Miller Rear Strain Relief for MDX-100 and MDX-250 MIG Guns – 2520100 Description Replacement rear strain relief for use with MDX™-100 and MDX™-250 MIG guns.
Miller Remote Output Panel Kit – 951850 Description Remotely mount your weld and auxiliary power output panels to a convenient spot on your work truck to minimize climbing onto the truck. You can also move your machine to an optimal spot on truck to maximize available payload space. Compatible with all engine drives with a 240V,…
Miller Remote Pendant Control Ice-60TM/80TM/100TM – 195513 Description Miller Remote Pendant Control Ice-60TM/80TM/100TM
Miller Remote Start / Stop Module, FOB Radio Receiver – 286385 Description Remote Start / Stop FOB for Miller Bobcat 225 & 260s equipped with Remote Start / Stop technology.
Miller Remote Voltage Sense Cable 60amp 26.5 ft. – 246285 Description Remote Voltage Sense Cable 60A / 26.5 ft.
Miller Replacement Air Filter for In-Line Filter Kit – 228928 Description Replacement Air Filter for In-Line Filter Kit. Removes water, dirt and oil as small as .85 microns with 99.9% efficiency. Accessories
