Showing 881–896 of 1079 results
Tweco Eliminator 3.183″ 0.625″ Bore EL22CT Series MIG Nozzle, 2/pk – 1260-1627 Description Tweco® Coarse Threaded Brass Nozzle with 0.625″ bore size is perfect for standard gas diffuser. 3.183″ Nozzle with 0.875″ OD making it ideal for use in light to medium duty welding application up to 250 A. It features part number rolled…
Tweco Eliminator EL52 Gas Diffusor, Brass – 5/pk – 1560-1110 Description Easy identification – Part No. rolled stamped on the outside surface Gas diffuser contains a spirol ring providing the surface for the slip-on nozzle assemblies to slide over Gas diffuser has a silicon O-ring to seal against the nozzle assembly Replacement O-ring – Part…
TWECO Eliminator EL52CT-16 Gas Diffuser, Brass, Eliminator 5/pack – 1560-1107 Description Easy identification – Part No. rolled stamped on the outside surface A course thread is machined on the outside surface to allow the nozzle assemblies to thread over – holding the nozzle in place during the welding process Gas diffuser has a silicon O-ring…
Tweco Eliminator EL54-SW Gas Diffuser, Brass, 5/pk – 1560-1114 Description Easy identification – Part No. rolled stamped on the outside surface Gas diffuser contains a spirol ring providing the surface for the slip-on nozzle assemblies to slide over Gas diffuser has a silicon O-ring to seal against the nozzle assembly Replacement O-ring Part No. EL54-1…
Tweco Flux Core LD Velocity Tip 2/pk – VNS-FC Description Tweco VNS-FC Flex Core LD Velocity Tip – Pack of 2 Designed to fit the Tweco Fusion 140, Fusion 180, Fusion 220, and Fusion 250 MIG guns.
Tweco FLUXCORED SEFC Gasless MIG Gun Description 350 & 450 AMP 60% Duty cycle MIG gun available with Tweco/Miller/Lincoln/Euro-Kwik Style rear connectors. Suitable for medium/heavy duty fabrication For use with all gasless wires Replaceable conduit and four trigger lead wires Standard consumables, interchangeable with other leading flux-cored guns Specifications
Tweco Fusion 180 MIG Gun 12′ 8-Pin – 1017-1332 Description Fusion 180 12 foot, 180 amp MIG gun has a Thermal Arc end that plugs directly into Thermal Arc and ESAB Rebel machines. Direct replacement for the Fabricator 181 and the ESAB Rebel 205ic & 215ic machines. 8 Pin Connection 180 amps at 40% Duty…
Tweco Fusion 180 MIG Gun 12′ Tweco 4-Pin – 1017-1331 Description Tweco Style (4 Pin) Rear Connector Easy to Maneuver in various welding positions to reduce operator fatigue Rugged Design with steel spring strain relief- built tough to last Ergonomic Handle Design with diamond pattern for better grip and greater operator appeal Impact-Resistant handle and…
Tweco FV212-3545 Fusion 250 MIG Gun 12′ Tweco 4-Pin – 1023-1060 Description Tweco FV212-3545 Fusion 250 MIG Gun 12′ Tweco 4-Pin
Tweco FVCTS-45 45 Degree Conductor Tube – Pack of 1 – FVCTS-45 Description Tweco FVCTS-45 45 Degree Conductor Tube – Pack of 1
Tweco Ground Clamp w/Lead, 10 ft. (3 m.), 50mm Dinse – WS200G10 Description Tweco 200 Amp ground clamp and cable assembly with #2 neoprene cable in 10 feet. Compatible with all welding power sources equipped with female 50mm dinse receptacles. Rugged & Reliable Design Ball-point screw secures the welding cable to the ground clamp Copper…
Tweco HD22-50 Nozzle, 1/2″ Tip Recess – 2/pk – 1220-1306 Description Easy identification – Part No. rolled stamped on the outside surface 3-piece design – does not require an additional insulator Used in heavy duty welding application up to 250 amperes 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper…
Tweco HD24 Series HD24-50 Nozzle (1/2) Tip Recess – 2 Per Pack – 1240-1240 Description Easy identification – Part No. rolled stamped on the outside surface 3-piece design – does not require an additional insulator Used in heavy duty welding application up to 450 amperes 3-piece nozzle design, includes: Nozzle Housing – Cut & Formed…
Tweco HD24 Series HD24-62 Nozzle (5/8) Tip Recess – 2 Per Pack – 1240-1241 Description Used in heavy duty welding application up to 450 amperes 3-piece nozzle design, includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing Nozzle Insert – machined from a solid brass allow and is crimped in place…
Tweco HD24 Series HD24L-62 Nozzle (5/8, Tapered) Tip Flush – 2 Per Pack – 1240-1201 Description Easy identification – Part No. rolled stamped on the outside surface 3-piece design – does not require an additional insulator Used in heavy duty welding application up to 450 amperes 3-piece nozzle design, includes: Nozzle Housing – Cut &…
Tweco HD54-16 Gas Diffuser, Brass – 1540-1136 Description Easy identification – Part No. rolled stamped on the outside surface A metal flat spring is attach to the OD of the gas diffuser to allow the nozzle assemblies to slide over – holding the nozzle in place during the welding process Gas diffuser has a silicon…
