Showing 33–48 of 143 results
Lincoln Connector Kit for Power MIG / Power Wave – K466-6 Description Magnum Connector Kit for Magnum 200, 300, and 400. For the Lincoln Wire-Matic and Power MIG power sources. For use with KP42 & KP44 series liners.
Lincoln Contact Jaw Assembly for 1/8-7/32″ (3.2-5.6mm) Wire – K226R Description A contact jaw assembly for 1/8-7/32; (3.2-5.6 mm) diameter wire. Rugged contact jaws for maximum life at currents over 600 amps. Made-to-order; non-cancellable and non-returnable
Lincoln Contactor Kit – K938-1 Description Installs in the K930-2 TIG Module for use with welders without a contactor. Makes the TIG torch electrode electrically ‘cold’ until the Amptrol is activated.
Lincoln Crater Fill Controls P.C. Board for Automatics – K245 Description Adjusts the finishing current and voltage higher or lower than welding procedures for an adjustable period of time as needed to control bead size or fill craters at the end of the weld.
Lincoln Distribution Box – K1736-1 Description Makes connecting up to 10 Multi-Weld 350s quick and easy. Contains copper bus bar for connecting multiple ″pig-tails″. Four ″pig tails″ included.
Lincoln Docking Kit – K939-1 Description Provides a means to dock the TIG Module on top of a flat-roofed power source, or any other flat surface measuring at least 10 x 15 in. (254 x 381mm). It includes a latch and provisions for a user-supplied padlock to lock the TIG Module in place.
Lincoln Dual Procedure Switch (5 pin) – K683-3 Description Allows the use of two welding procedures with one Lincoln Magnum gun connected to a LN-10 or DH-10. 15 ft. (7.6 m).
Lincoln EN 20 Nozzle – K2389-5 Description Top Features The EN 20 nozzle is designed for a wide array of welding applications. With its funnel extraction opening and magnetic mounting stand, it gives the welder a great amount of versatility
Lincoln EN 40 Nozzle – K2389-6 Description The EN 40 nozzle is designed for stick electrode applications. L-shaped tube and an elongated slotted opening, the EN 40 nozzle is designed to coincide with the time it takes the welder to use one stick electrode. Alleviates the welder from having to continuously reposition the nozzle. Magnetic…
Lincoln Exhaust or Extension Hose Set – K1668-2 Description 5.75 in. diameter, 16 ft. long exhaust or extension hose set for the Mobiflex 100-NF.
Lincoln Flux Cone – K119 Description Fits K112 and K113 guns for welding without the Continuous Flux Feeding Tank Assembly.
Lincoln Flux Hopper Assembly – K389 Description Flux Hopper assembly for submerged arc applications. Includes flux hopper and mounting hardware.
Lincoln Gas Tube Kit – K481 Description Fast connect gas tube kit provides tool-less gas connection to Lincoln wire feeders.
Lincoln GFCI Receptacle Kit – 120V, 20 Amp – K1690-1 Description Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installation instructions Replaces the factory-installed 120V duplex receptacle. Each receptacle of the GFCI duplex is rated at 20 amps Maximum total current from the GFCI duplex is limited to 20 amps…
Lincoln GMA Timer Kit – K418 Description Provides delays for preflow and post-flow gas, adjustable burn back, and a purge/cold inch switch. For LN-7GMA only. Made-to-order; non-cancellable and non-returnable
Lincoln Gun Receiver Bushing – K1500-1 Description Gun receiver bushing for the following guns: Magnum 200, 300 and 400 gun and cable assemblies with K466-1 connector kit. Lincoln Innershield gun and cable assembly. Fast-Mate gun and cable assembly with K489-2 Fast-Mate Adapter Kit. Magnum 550 gun and cable assembly with K613-1. Accessories
